DESIGN AND TECHNICAL 0844 800 4576
SALES 0844 800 4575
Illustrated in this section are a range of copings and cappings suitable for solid or cavity walls with associated stop ends and returns along with specials for improved visual choice. Some of these cappings and copings are available in Caplock®.
Please note that perforations of products vary by special type and factory of manufacture.
| TYPE NO. | A | B | C | D1 | D2 |
|---|---|---|---|---|---|
| CP.1.2 | 215 | 108 | 65 | – | – |
| TYPE NO. | A | B | D1 | D2 |
|---|---|---|---|---|
| I.CP.5.1 | 305 | 153 | 13 | 15 |
*
| TYPE NO. | A | B | D1 | D2 |
|---|---|---|---|---|
| I.CP.5.2 | 215 | 108 | – | – |
* Angles are available.
| TYPE NO. | A | B | C | D1 | D2 |
|---|---|---|---|---|---|
| I.CP.6.1 | 305 | 153 | 184 | 13 | 15 |
| TYPE NO. | A | B | C | D1 | D2 |
|---|---|---|---|---|---|
| I.CP.6.2 | 215 | 108 | 140 | – | – |
| TYPE NO. | A | B | C | D1 | D2 |
|---|---|---|---|---|---|
| I.CP.20.1 | 305 | 153 | 215 | 13 | 15 |
An Ibstock Kevington alternative to the CP.1.1 format for improved visual choice.
| TYPE NO. | A | B | C | D1 | D2 |
|---|---|---|---|---|---|
| I.CP.20.2 | 215 | 108 | 215 | – | – |
An Ibstock Kevington alternative to the CP.1.2 format for improved visual choice.
| TYPE NO. | A | B | C | D1 | D2 | E |
|---|---|---|---|---|---|---|
| CP.2.2 | 215 | 123 | 65 | – | – | 50 |
| TYPE NO. | A | B | D1 | D2 | E |
|---|---|---|---|---|---|
| I.CP.9.1 | 305 | 153 | 13 | 15 | 50 |
*
| TYPE NO. | A | B | D1 | D2 | E |
|---|---|---|---|---|---|
| I.CP.9.2 | 215 | 123 | – | – | 50 |
* Angles are available.
| TYPE NO. | A | B | C | D1 | D2 | E |
|---|---|---|---|---|---|---|
| I.CP.21.1 | 305 | 153 | 215 | 13 | 15 | 50 |
An Ibstock Kevington alternative to the CP.2.1 format for improved visual choice.
| TYPE NO. | A | B | C | D1 | D2 | E |
|---|---|---|---|---|---|---|
| I.CP.21.2 | 215 | 123 | 215 | – | – | 50 |
An Ibstock Kevington alternative to the CP.2.2 format for improved visual choice.
†
| TYPE NO. | A | B | C |
|---|---|---|---|
| I.F.1.1 | 215 | 65.5 | 42 |
| I.F.1.2 | 255 | 77.5 | 50 |
† Note: other widths available.
†
| TYPE NO. | A | B | C |
|---|---|---|---|
| I.F.2.1 | 215 | 65.5 | 42 |
| I.F.2.2 | 255 | 77.5 | 50 |
† Note: other widths available.
| TYPE NO. | A | B | C |
|---|---|---|---|
| I.F.3.1 | 215 | 65.5 | 42 |
| I.F.3.2 | 255 | 77.5 | 50 |
| TYPE NO. | A | B | C |
|---|---|---|---|
| I.F.4.1 | 215 | 65.5 | 42 |
| I.F.4.2 | 255 | 77.5 | 50 |
| TYPE NO. | A | B | C | D | E | α |
|---|---|---|---|---|---|---|
| I.F.5.1 | 215 | 65.5 | 42 | 159 | 101 | 30° |
| I.F.5.2 | 215 | 65.5 | 42 | 159 | 70 | 45° |
| I.F.5.3 | 215 | 65.5 | 42 | 159 | 35 | 60° |
| I.F.5.4 | 255 | 77.5 | 50 | 164 | 90 | 30° |
| I.F.5.5 | 255 | 77.5 | 50 | 164 | 64 | 45° |
| I.F.5.6 | 255 | 77.5 | 50 | 164 | 35 | 60° |
| TYPE NO. | A | B | C | α |
|---|---|---|---|---|
| I.F.6.1 | 215 | 65.5 | 42 | Δ |
| I.F.6.2 | 255 | 77.5 | 50 | Δ |
Δ Angle to be specified.
| TYPE NO. | A | B | C | α |
|---|---|---|---|---|
| I.F.7.1 | 215 | 65.5 | 42 | Δ |
| I.F.7.2 | 255 | 77.5 | 50 | Δ |
Δ Angle to be specified.
| TYPE NO. | A | B | C | D | E |
|---|---|---|---|---|---|
| I.BC.1.1 | 102 | 45 | 35 | 65 | 215 |
| I.BC.1.2 | 122 | 45 | 35 | 65 | 215 |
** Note: can be cut to form an incline to transition unit.
| TYPE NO. | A | B | C | D | E |
|---|---|---|---|---|---|
| I.BC.6.1 | 102 | 45 | 35 | 65 | 178 |
| I.BC.6.2 | 122 | 45 | 35 | 65 | 178 |
| TYPE NO. | A | B | C | D | E |
|---|---|---|---|---|---|
| I.BC.8.1 | 102 | 45 | 35 | 65 | 215 |
| I.BC.8.2 | 122 | 45 | 35 | 65 | 235 |
| TYPE NO. | A | B | C | D | E |
|---|---|---|---|---|---|
| I.BC.9.1 | 102 | 45 | 35 | 65 | 228 |
| I.BC.9.2 | 122 | 45 | 35 | 65 | 228 |
